Abstract
The incorporation of electrical components into 3D printed products such as sensors or printing of circuits requires the use of 3D printable conductive materials. However, most conductive materials available for fused filament fabrication (FFF have conductivities of less than 1000 S/m. Here, we describe the study of conductive thermoplastic composites comprising either nylon 6 or polyethylene (PE) matrix. The fillers used were nickel and Sn95Ag4Cu1, a low melting point metal alloy. The combination of nickel metal particles and tin alloy allows for higher metal loading at lower melt viscosity, compared to composites of nickel metal particles alone. Conductivities of 31,000 S/m were achieved, and 30 vol. % metal loading was processable by a single screw extruder. Embedded conductive tracks of various geometries were easily printed via FFF. Electrical conductivity of embedded conductive track has been investigated as a function of geometrical variation, where conductive tracks printed along a horizontal axis show resistance of <= 1 Omega. Porosity of the printed track is shown to increase with prints along the vertical axis, leading to a reduction in electrical conductivity of more than two orders of magnitude.