Abstract
The unusual ability of geckos to climb vertical walls underlies a unique combination of a hierarchical structural design and a stiffer material composition. While a dense array of microscopic hierarchical structures enables the gecko toe pads to adhere to various surfaces, a stiffer material (beta-keratin) composition enables them to maintain reliable adhesion over innumerable cycles. This unique strategy has been seldom implemented in engineered dry adhesives because fabrication of high-aspect-ratio hierarchical structures using a stiffer polymer is challenging. Herein, we report the fabrication of high-aspect-ratio hierarchical arrays on flexible polycarbonate sheets (stiffness comparable to that of beta keratin) by a sacrificial-layer-mediated nanoimprinting technique. Dry-adhesive films comprising the hierarchical arrays showed a formidable shear adhesion of 11.91 +/- 0.43 N/cm(2). Cyclic adhesion tests also showed that the shear adhesion of the adhesive films reduced by only about 20% after 50 cycles and remained nearly constant until about 200 cycles. Most importantly, the high-aspect-ratio hierarchical arrays were integrated onto the feet of a miniature robot and the locomotion on a 30 inclined surface was demonstrated.